News Type
Contact Us
This form does not yet contain any fields.

    Projecta Workshop

     

    Multi Voltage Operation
    Suitable for charging 6, 12 or 24 Volt batteries.

    Manual Charge
    When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
    Automatic Charge
    Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state.
    0-14 Hour Timer
    Automatically turns the battery charger off after set time. Can be set at 60 min intervals.
    Engine Start
    If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
    L.E.D Voltage/Amp Display
    A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery.
    Thermal Overload/Polarity Protection
    Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety.